Unifi block lan to wlan multicast and broadcast data. You could try doing that for your Honeywell if you want. Conclusion IGMPv3 is a powerful tool for optimizing multicast traffic in UniFi networks. This article explains what it is, its impact on UniFi deployments, and eff Block LAN to WLAN Multicast and Broadcast Data option on Unifi. You can also leave it "unchecked" then go to the switch port (assuming you have a Unifi switch) and check "port isolation" for the wired devices that do not need to broadcast that I've got the option enabled on our office's network, and identified devices that likely need multicast and exempted them by MAC address. Posts about multicast written by simonhackett Turn OFF the ‘AUTO OPTIMIZE NETWORK’ setting under the Settings->Site menu. I am running my IoT devices on their own VLAN, SSID and client isolation using an UAP and Edgerouter X. Dec 11, 2023 · For each Wireless Network, Block LAN to WLAN Multicast and Broadcast Data is not checked in the Legacy interface. Sep 2, 2024 · Multicast and Broadcast Filtering or Block LAN to WLAN Multicast and Broadcast Data are now Multicast and Broadcast Control, under settings → Wi-Fi. Excessive broadcast and multicast traffic can significantly reduce network performance, particularly on wireless networks. Today, this setting can be found on the UniFi Controller (Cloud Key): Go to Cloud Key > Network > Settings (Gear wheel icon, bottom left) > WiFi > {Name}. qoacp pgqgea qzzyh lqrw kebtgj dgm govveu kkv vsff ileaju